Contact sales. Download image - 5. Image Data. Service and Support. UF High Resolution. UF Low Resolution. UF product image.
Download Drivers. Fax Machines. Canon Fax Machine. Panasonic Fax Machine. Ricoh Fax Machine. Sharp Fax Machine. Xerox Fax Machine.
Package Deals. Paper Handling. Paper Shredders. Support Center. Site Map. All rights reserved. Ensure that the plug connection is free of dust. In a damp environment, a contaminated connector can draw a significant amount of current that can generate heat and eventually cause fire if left unattended over an extended period of time. If you use a cord with an unspecified current rating, the machine, or plug may emit smoke, or become hot to the touch.
Do not attempt to repair, pull, bend, chafe, or otherwise damage the power cord. Do not place a heavy object on the cord. A damaged cord can cause fire, or electric shocks.
If the power cord is broken, or insulated wires are exposed, contact the authorized Panasonic dealer for a replacement. Using a damaged cord can cause fire, or electric shocks.
When disconnecting the machine, grasp the plug instead of the cord. Pulling on a cord forcibly can damage it and cause fire, or electric shock. Stop operation immediately if your machine emits smoke, excessive heat, unusual noise or smell, or if water is spilt onto the machine. These conditions can cause fire. Immediately unplug the machine and contact the authorized Panasonic dealer.
When the machine is not used over an extended period of time, unplug it. If an unused machine is left connected to a power source for a long period, degraded insulation can cause electric shocks, current leakage or fire. Be sure to unplug the machine before accessing the interior of the machine for cleaning, maintenance or fault clearance.
Once a month, unplug the machine and check the power cord for the following. If you notice any unusual condition, contact the authorized Panasonic dealer. Do not touch areas where these caution labels are attached to, the surface may be very hot and may cause severe burns. Do not place any liquid container such as a vase or coffee cup on the machine.
Spilt water can cause fire or shock hazard. Do not place any metal parts such as staples or clips on the machine. If metal and flammable parts get into the machine, they can short-circuit internal components and cause fire or electric shocks.
If debris Metal or liquid gets into the machine, unplug the machine immediately. Contact the authorized Panasonic dealer. Operating a debris-contaminated machine can cause fire or electric shock.
A highvoltage component can cause electric shocks. Do not try to alter the machine configuration or modify any parts. An unauthorized modification can cause smoke or fire. Never dispose of toner into an open flame. For disposal or recycling information, contact your local authorities, or your local waste officials. Do not place the machine near heaters or volatile, flammable, or combustible materials such as curtains that may catch fire.
Do not place the machine in a hot, humid, dusty or poorly ventilated environment. Prolonged exposure to these adverse conditions can cause fire or electric shocks. Place the machine on a level and sturdy surface that can withstand a weight of the machine. If tilted, the machine may tip-over and cause injuries.
When moving the machine, be sure to unplug the power cord from the outlet. If the machine is moved with the power cord attached, it can cause damage to the cord which could result in fire or electric shock. Do not place a magnet near the safety switch of the machine. A magnet can activate the machine accidentally, resulting in injuries.
Do not use a highly flammable spray or solvent near the machine. It can cause fire. If a sheet of paper is wrapped around the heat roller, do not try to remove it yourself to avoid injuries or burns. Unplug the machine immediately and contact an authorized Panasonic dealer.
Do not use conductive paper. Ex: carbon paper, and coated paper. When paper misfeed occurs, it can cause a short-circuit and fire. Do not place any heavy objects on the machine. Keep the room ventilated when using the machine for an extended period of time to minimize the ozone density in the air. When removing misfed paper, make sure that no pieces of torn paper are left in the machine. A piece of paper remaining in the machine can cause fire. If a sheet of paper is wrapped around the heat roller or when clearing a misfed paper that is difficult or impossible to see, do not try to remove it by yourself.
Doing so can cause injuries or burns. If accessing the inner components of the machine to clear misfed paper, etc. Your Machine. Getting to Know. It can cause an explosion and you can get burnt. Store in a cool and dry place low humidity. Never heat the drum cartridge, or scratch its surface. A heated or scratched drum can be hazardous to your health. If lightning strikes in your neighborhood, maintain ample distance from the machine and do not touch the machine until the lightning has stopped.
Unplug the machine and if the interference disappears, the machine is the cause of the radio interference. Perform the following procedure until the interference is corrected. For an outdoor antenna, ask your local electrician for support. See www. When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:.
Install the machine on a flat surface, leave at least 10 cm 4" of space between the machine and other objects. A properly wired grounded , dedicated, 15A, V AC outlet is required. Do not use an extension cord. Please ensure that the machine is installed near a wall outlet and is easily accessible. The machine should be installed under the following.
This may void the warranty of the machine and supplies. Copying certain documents may be illegal in your country. The following are examples of items that may be illegal to copy in your country. This list is not inclusive and no liability is assumed for either its completeness or accuracy.
Install your machine near a supervised area to prevent illegal copies from being made. Panasonic is not responsible for data loss and any consequence caused by computer virus infection or external shocks. This unit employs a laser. Only qualified service personnel should attempt to service this device due to possible eye injury.
Laser output: Max. Always connect through a Firewall when installing your device on a network that is connected to the Internet. When connecting this device to a client PC or a server, we recommend configuring your network environment with a switching hub to prevent your device from being wiretapped.
Keep this information confidential. Delete the data completely before transferring or destroying the device. If the device mulfunctions and the data are deleted, it cannot be recovered and is not covered in the warranty. Incorrect settings may leak settings or impede use of this device. Check the details carefully when performing settings.
On occasion, the clock may need adjustment. The Key Operator plays a critical part in maintaining and controlling the security of the device and in prevention of its unauthorized access, therefore, it is of utmost importance that you understand the content described in the Operating Instructions and that you follow the suggestions herein.
Any function can be started by first pressing Function and then entering the function number, or by. Power Cord. Warning: This apparatus must be properly grounded. Do not modify the AC outlet. Power Cord Included. You can connect an additional standard single line telephone to the machine. To connect the telephone, break off the protective tab on the TEL jack. If using an External Telephone option with the machine, the machine does not detect the external telephone being in use.
Telephone Line Cable. Plug one end of the telephone line cable into the telephone jack supplied by the telephone company and the other end into the LINE jack on the left side of the machine. Do not extend the telephone line cord. In the event of problems, you should contact your equipment supplier in the first instance. Installing Your. Used toner cartridge should be disposed of properly according to local regulations. In general, most bond papers will produce excellent results.
Most photocopy papers will also work very well. There are many "name" and "generic" brands of paper available. We recommend that you test various papers until you obtain the desired results. For detailed recommended paper specifications, See page The Paper Cassette weighs approximately 2 kg 4. Your machine can operate with either of two dialing methods Tone or Pulse , depending on the type of telephone line you are connected to.
If you need to change the dialing method to Tone or Pulse, follow the procedure below. You can adjust the monitor and ringer volume on your machine. The built-in speaker enables you to hear the dial tone, dialing signals, and busy tone. The ringer sounds when your machine receives a call.
You can also adjust the volume of the key touch tone and the volume of the buzzer in the Fax. Your facsimile machine has several basic settings User Parameters to help you keep records of the documents you send or receive. For example, the built-in clock keeps the current date and time, and your LOGO and ID number help to identify you when you send or receive documents.
At standby the display will show the date and time. Once the standby display is set, it will automatically be updated. If you made a mistake, use or to move the cursor over the incorrect number, then overwrite it with the correct one.
The clock may occasionally require adjustment. The clock of your machine is equipped with D. Daylight Saving Time system. Set the Daylight Time according to your local regulation.
If your state does not use the D. See page When you send a document, your LOGO appears on the top of the copy printed out at the other station.
The LOGO helps to identify you to someone who receives your document. If you made a mistake, use or to move the cursor.
If more than 16 characters are entered, the left side characters will scroll off the display. If the remote machine has Character ID capabilities, when you are sending or receiving, your Character ID will appear on the remote machine's display and the remote machine's Character ID will appear on your display.
We suggest you use your facsimile telephone number as your ID number. Up to 20 digits. If more than 16 characters are entered, the left side 7 characters will scroll off the display. NOTE 1. The Key Operator Password is user-definable. The factory default password is Using the keypad on the control panel, you can enter numbers, letters case-sensitive , and symbols ,.
The and keys cannot be used. Enter the new Key Operator Password up to 8 characters and digits by using the keypad. Select the desired characters according to the following table. One-Touch and Abbreviated Dialing are two fast ways of dialing full telephone numbers. To use these dialing methods, you must first store the telephone number using the following procedure. To record another number, repeat steps 4 to 8. To return to standby, press Stop. If you require a special access number to get an outside line, enter it first and then press.
If you are using Pulse dialing and you wish to change to Tone dialing in the middle of dialing,. If you made a mistake, use or to move the cursor beyond the incorrect number, press. Refer to the Help pages of the software for the procedures to print the directory sheet. Your facsimile machine has a variety of adjustable Fax Parameters. These parameters, listed in the Parameter Table, are preset for you and do not need to be changed.
If you do want to make a change, read the table carefully. Some parameters, such as the Resolution and Contrast parameters, can be temporarily changed by simple key operations just before a transmission is made. When the transmission ends, however, these parameters return to their preset values home position.
Other parameters can only be changed by the procedure described below. The standard settings are printed on the Fax Parameter List. To print out Fax Parameter List. In general, your machine will send any A4, Letter or Legal size document printed on high quality paper. The illustrations below are provided as a quick reference only.
There are many "name" and "generic" brands of paper available, we recommend that you test various media thoroughly to find one that meets your needs. Chemically processed Ex: pressure-sensitive paper, carboncoated paper, etc. To transmit these kinds of documents, make a photocopy first and then transmit the copy instead.
Be sure the document s is free of staples, paper clips and is not torn, greasy or covered by foreign objects. If you are sending multiple pages, make sure that the bottom sheet enters first. If you have more than 30 pages, wait until transmission or storing in memory starts as pages feed through, and place any remaining pages on top of the last page in the feeder.
When you set a document on the ADF , t he display message will change from date and time standby to the following message. You can now change basic transmission settings or begin the dialing procedure. You can temporarily change the transmission settings either before or after you place the document on the ADF. After your document s have been sent, your machine will automatically return to the preset settings.
Your machine is preset to Normal contrast. If you wish to send a document with lighter contrast, change the setting to Lighter. If you wish to send a document with darker contrast, change the setting to Darker. Your machine is preset to Standard resolution, which is suitable for most documents. If you want to send it with more detail, change the setting to Fine , Super Fine or Halftone.
To change the preset Contrast position, change the setting of Fax Parameter No. To change the preset Resolution position, change the setting of Fax Parameter No. A Communication Journal lets you verify if the transmission was successful.
You can select the condition to print out the Communication Journal as follows. When you set COMM. To change the preset Comm. Journal condition, change the setting of Fax Parameter No. Your machine quickly stores the document into the machine's memory. It then starts to dial the telephone number. If the transmission fails, your machine will re-transmit the remaining unsuccessful page s automatically.
The File Number of the document being stored is shown at the upper right corner of the display while storing the document.
0コメント